High-Volumetric Density Atomic Cobalt on Multishell ZnxCd1-xS Boosts Photocatalytic CO2 Reduction.

The volumetric density of the metal atomic site is decisive to the operating efficiency of the photosynthetic nanoreactor, yet its rational design and synthesis remain a grand challenge. Herein, we report a shell-regulating approach to enhance the volumetric density of Co atomic sites onto/into multishell ZnxCd1-xS for greatly improving CO2 photoreduction activity. We first establish a quantitative relation between the number of shell layers, specific surface areas, and volumetric density of atomic sites on multishell ZnxCd1-xS and conclude a positive relation between photosynthetic performance and the number of shell layers. The triple-shell ZnxCd1-xS-Co1 achieves the highest CO yield rate of 7629.7 µmol g-1 h-1, superior to those of the double-shell ZnxCd1-xS-Co1 (5882.2 µmol g-1 h-1) and single-shell ZnxCd1-xS-Co1 (4724.2 µmol g-1 h-1). Density functional theory calculations suggest that high-density Co atomic sites can promote the mobility of photogenerated electrons and enhance the adsorption of Co(bpy)32+ to increase CO2 activation (CO2 → CO2* → COOH* → CO* → CO) via the S-Co-bpy interaction, thereby enhancing the efficiency of photocatalytic CO2 reduction.

Precise Tuning of the D-Band Center of Dual-Atomic Enzymes for Catalytic Therapy.

Single-atom nanozyme-based catalytic therapy is of great interest in the field of tumor catalytic therapy; however, their development suffers from the low affinity of nanozymes to the substrates (H2O2 or O2), leading to deficient catalytic activity in the tumor microenvironment. Herein, we report a new strategy for precisely tuning the d-band center of dual-atomic sites to enhance the affinity of metal atomic sites and substrates on a class of edge-rich N-doped porous carbon dual-atomic sites Fe-Mn (Fe1Mn1-NCe) for greatly boosting multiple-enzyme-like catalytic activities. The as-made Fe1Mn1-NCe achieved a much higher catalytic efficiency (Kcat/Km = 4.01 × 105 S-1·M-1) than Fe1-NCe (Kcat/Km = 2.41 × 104 S-1·M-1) with an outstanding stability of over 90% activity retention after 1 year, which is the best among the reported dual-atom nanozymes. Theoretical calculations reveal that the synergetic effect of Mn upshifts the d-band center of Fe from -1.113 to -0.564 eV and enhances the adsorption capacity for the substrate, thus accelerating the dissociation of H2O2 and weakening the O-O bond on O2. We further demonstrated that the superior enzyme-like catalytic activity of Fe1Mn1-NCe combined with photothermal therapy could effectively inhibit tumor growth in vivo, with an inhibition rate of up to 95.74%, which is the highest value among the dual-atom artificial enzyme therapies reported so far.

A laser-induced zinc oxide/graphene photoelectrode for a photocurrent-polarity-switching photoelectrochemical biosensor with bipedal DNA walker amplification.

A photocurrent-polarity-switching photoelectrochemical (PEC) biosensor was developed for the ultrasensitive detection of tobramycin (TOB) through bipedal DNA walker amplification with hemin-induced photocurrent-polarity-switching using a laser-induced zinc oxide/graphene (ZnO/LIG) photoelectrode. Specifically, the ZnO/LIG photoelectrode was synthesized in situ by a laser direct writing (LDW) technique. In the presence of TOB, it reacted with HP1 and HP2 and the DNA walker response was activated to form a stable hemin/G-quadruplex. Furthermore, hemin induced a polarity shift in the photocurrent signal. The developed analytical platform exhibited excellent photoelectron transport performance of ZnO/LIG, the signal amplification effect of the DNA walker strategy, and the photocurrent-polarity-switching ability of hemin. Therefore, it demonstrated satisfying photocurrent responses to the target TOB within the working range of 20 nM-1.0 µM at a low detection limit of 5.43 nM. The PEC platform exhibited good stability, reproducibility, sufficient sensitivity and high selectivity for complex experimental samples. Moreover, the photocurrent-polarity-switching PEC biosensor improved the anti-interference ability and avoided false positives or negatives.

Cation Exchange Reaction-Mediated Photothermal and Polarity-Switchable Photoelectrochemical Dual-Readout Biosensor.

Cation exchange (CE) is a burgeoning method for controlled crystal synthesis; however, its applications in bioanalysis are still in their infancy. Herein, we explored the transformation of ZnIn2S4 in properties after the CE reaction with Cu2+ ions; furthermore, the discrepancy was employed to design a dual-readout detection system of photothermal and polarity-switchable photoelectrochemical (PEC) immunoassays to realize reliable detection of carcinoembryonic antigen (CEA). In the presence of CEA, the CuO nanoparticles (CuO NPs) employed as dual-signal response probes would bond to the microplates and be acidolyzed by HCl to release Cu2+, which could replace Zn2+ and In3+ via the CE reaction. After the CE reaction is completed, the photocurrent would switch from a weak anodic photocurrent to a cathode one by using a 635 nm laser as a signal amplifier, while the photothermal signal would be enhanced with 808 nm laser illumination. On the basis of the polarity-switchable PEC strategy, CEA could be accurately detected from 0.1 to 50 ng mL-1 with a limit of detection (LOD) of 48 pg mL-1 (S/N = 3). Moreover, the photothermal assay for CEA detection possesses a linear range from 0.5 to 100 ng mL-1 with a LOD of 0.21 ng mL-1. In addition, the designed sensing platform only relies on devices with portability that are permitted for point-of-care detection.

High-entropy effect with hollow (ZnCdFeMnCu)xS nanocubes for photoelectrochemical immunoassay.

High entropy (HE) compounds with chemically disordered multi-cation structures have become a hot research topic because of their fascinating "cocktail effect". However, high entropy effect with the efficient photoelectric response has not been reported for photoelectrochemical (PEC) immunoassays. Herein, an innovative PEC immunoassay for the sensitive detection of prostate-specific antigen (PSA) was ingeniously constructed using hollow nanocubic (ZnCdFeMnCu)xS photoactive matrices with high entropic effect via the cation exchange. Initially, a sandwich-type immunoreaction has behaved using dopamine-loaded liposome labeled with anti-PSA secondary antibodies. In the presence of PSA, addition of Triton X-100 caused the liposomal cleavage to release dopamine, which was then detected as a reduced photocurrent on (ZnCdFeMnCu)xS-based photoelectrode. Under optimal condition, the PEC immunoassay showed good photocurrent responses toward target PSA with the dynamic linear range of 0.1-50 ng mL-1 with a limit of detection of 34.1 pg mL-1. Significantly, this system can provide a new platform for the development of PEC immunoassays by coupling with high-entropy photoactive materials.

Atomically Site Synergistic Effects of Dual-Atom Nanozyme Enhances Peroxidase-like Properties.

Pursuing effective and generalized strategies for modulating the electronic structures of atomically dispersed nanozymes with remarkable catalytic performance is exceptionally attractive yet challenging. Herein, we developed a facile "formamide condensation and carbonization" strategy to fabricate a library of single-atom (M1-NC; 6 types) and dual-atom (M1/M2-NC; 13 types) metal-nitrogen-carbon nanozymes (M = Fe, Co, Ni, Mn, Ru, Cu) to reveal peroxidase- (POD-) like activities. The Fe1Co1-NC dual-atom nanozyme with Fe1-N4/Co1-N4 coordination displayed the highest POD-like activity. Density functional theory (DFT) calculations revealed that the Co atom site synergistically affects the d-band center position of the Fe atom site and served as the second reaction center, which contributes to better POD-like activity. Finally, Fe1Co1 NC was shown to be effective in inhibiting tumor growth both in vitro and in vivo, suggesting that diatomic synergy is an effective strategy for developing artificial nanozymes as novel nanocatalytic therapeutics.

Ag/MoO3-Pd-mediated gasochromic reaction: An efficient dual-mode photoelectrochemical and photothermal immunoassay.

Herein, we presented a dual-readout gasochromic immunosensing platform for accurate and sensitive detection of carcinoembryonic antigen (CEA) based on Ag-doped/Pd nanoparticles loaded MoO3 nanorods (Ag/MoO3-Pd). Initially, the presence of analyte CEA would prompt the formation of sandwich-type immunoreaction, accompanied by the introduction of Pt NPs labeled on detection antibody. Upon the addition of NH3BH3, the product hydrogen (H2) will interact with Ag/MoO3-Pd as a bridge between the sensing interface and the biological assembly platform. Both photocurrent and temperature signals can serve as readouts due to the significantly increased PEC performance and enhanced photothermal conversion capability of H-Ag/MoO3-Pd (the product of Ag/MoO3-Pd react with H2) compared to Ag/MoO3-Pd. In addition, the DFT results show that the band gap of Ag/MoO3-Pd becomes narrower after the reaction with H2, thus improving the utilization of light, which theoretically explains the internal mechanism of gas sensing reaction. Under optimal conditions, the designed immunosensing platform showed good sensitivity for CEA detection with the limit of detection (LOD) of 26 pg mL-1 (photoelectrochemical mode) and 98 pg mL-1 (photothermal mode). This work not only presents the possible reaction mechanism of Ag/MoO3-Pd and H2, but also creatively applicate it in photothermal biosensors that give a new path for devising dual-readout immunosensor.

Photocurrent-Polarity-Switching Photoelectrochemical Biosensor for Switching Spatial Distance Electroactive Tags.

This work presents a photocurrent-polarity-switching-based photoelectrochemical (PEC) biosensing platform for ultrasensitive detection of microRNA-21 (miR-21) through target-triggered catalytic hairpin assembly (CHA) for modulation of methylene blue (MB) and ferrocene (Fc) positional configurations using double-shelled Cu-doped ZnS nanocages (NCs)-Au nanoparticles (NPs) as photoactive materials. In the presence of miR-21, the assembly of MB-labeled HP1 and Fc-labeled HP2 leads to the generation of a large amount of double-stranded DNA (HP1-HP2), which pushes MB away from the electrode surface and brings Fc close to the electrode surface, resulting in effectively quenching the enhanced PEC signal to activate the photocurrent-polarity-switching system. Benefiting from the distance-controllable strategy, the designed PEC bioanalysis can effectively eliminate false-positive and false-negative signals due to the change of different signal expression patterns (from traditional the "signal-on" mode to the photocurrent-polarity-switching mode), thereby significantly improving the sensing specificity and sensitivity. The proposed PEC sensing system exhibited satisfying photocurrent responses toward target miR-21 within the working range from 1.0 fM to 1 nM at a low limit of detection (LOD) of 0.58 fM. More importantly, we demonstrated the successful integration of the proposed PEC biosensor with a handheld wireless device for instant detection of miR-21 concentrations in practical samples.

Smartphone-Based Electrochemical Immunoassay for Point-of-Care Detection of SARS-CoV-2 Nucleocapsid Protein.

Large-scale, rapid, and inexpensive serological diagnoses of severe acute respiratory syndrome-coronavirus-2 (SARS-CoV-2) are of great interest in reducing virus transmission at the population level; however, their development is greatly plagued by the lack of available point-of-care methods, leading to low detection efficiency. Herein, an ultrasensitive smartphone-based electrochemical immunoassay is reported for rapid (less than 5 min), low-cost, easy-to-implement detection of the SARS-CoV-2 nucleocapsid protein (SARS-CoV-2 N protein). Specifically, the electrochemical immunoassay was fabricated on a screen-printed carbon electrode coated with electrodeposited gold nanoparticles, followed by incubation of anti-N antibody (Ab) and bovine serum albumin as the working electrode. Accompanied by the antigen-antibody reaction between the SARS-CoV-2 N protein and the Ab, the electron transfer between the electroactive species [Fe(CN)6]3-/4- and the electrode surface is disturbed, resulting in reduced square-wave voltammetry currents at 0.075 V versus the Ag/AgCl reference electrode. The proposed immunoassay provided a good linear range with SARS-CoV-2 N protein concentrations within the scope of 0.01-1000 ng/mL (R2 = 0.9992) and the limit of detection down to 2.6 pg/mL. Moreover, the detection data are wirelessly transmitted to the interface of the smartphone, and the corresponding SARS-CoV-2 N protein concentration value is calculated and displayed. Therefore, the proposed portable detection mode offers great potential for self-differential diagnosis of residents, which will greatly facilitate the effective control and large-scale screening of virus transmission in resource-limited areas.

Dual-mode colorimetric-photothermal sensing platform of acetylcholinesterase activity based on the peroxidase-like activity of Fe-N-C nanozyme.

Sensors based on colorimetry, fluorescence, and electrochemistry have been widely employed to detect acetylcholinesterase and its inhibitors, however, there are only a minority of strategies for AChE detection based on photothermal method. This work reports a versatile dual-mode colorimetric and photothermal biosensing platform for acetylcholinesterase (AChE) detection and its inhibitor (paraoxon-ethyl, a model of AChE inhibitors) monitor based on Fe-N-C/H2O2/3,3',5,5'-tetramethylbenzidine (TMB) system. The Fe-N-C with abundant active Fe-Nx sites shows outstanding peroxidase-mimicking activity and can be used to promote the generation of •OH by H2O2 to oxidize TMB. However, the introduction of mercapto molecules tending to coordinate with metal atoms result in the block of action site in Fe-N-C, thereby decrease its peroxidase-mimetic activity. The designed biosensor principle is based on the block of active sites of Fe-N-C by thiocholine (TCh, one kind of mercapto molecules) that can be produced by acetylthiocholine (ATCh) in the presence of AChE. Under optimum conditions, the limit of detection (LOD) for AChE activity is 1.9 mU mL-1 (colorimetric) and 2.2 mU mL-1 (photothermal), while for paraoxon-ethyl is 0.012 µg mL-1 (colorimetric) and 0.013 µg mL-1 (photothermal), respectively. The assay we proposed not only can be designed to monitor AChE detection and its inhibitors, but also can be easily extended for the detection of other biomolecules relate to the generation or consumption of H2O2.

Smartphone-Based Photoelectrochemical Immunoassay with Co9S8@ZnIn2S4 for Point-of-Care Diagnosis of Breast Cancer Biomarker.

Photoelectrochemical immunoassays incorporating specific antigen-antibody recognition reactions with the photon-electron conversion capabilities of photocatalysts have been developed for biomarker detection, but most involve bulky and expensive equipment and are unsuitable for point-of-care testing. Herein, a portable smartphone-based photoelectrochemical immunoassay was innovatively designed for the on-site detection of breast cancer biomarkers (human epidermal growth factor receptor 2; HER2). The system consists of a split-type immunoassay mode, disposable screen-printed electrode covered with hierarchical Co9S8@ZnIn2S4 heterostructures, an integrated circuit board, and a Bluetooth smartphone equipped with a specially designed app. Using alkaline phosphatase (ALP) catalytic strategy to in situ generate ascorbic acid (AA) for electron-donating toward Co9S8@ZnIn2S4 heterostructures, an immunoreaction was successfully constructed for the HER2 detection in the real sample due to the positive correlation of the photocurrent signal to electron donor concentration. Differential charge density indicates that the formation of Co9S8@ZnIn2S4 heterojunction can facilitate the flow of charges in the interface and enhance the photocurrent of the composite. More importantly, the measured photocurrent signal can be wirelessly transmitted to the software and displayed on the smartphone screen to obtain the corresponding HER2 concentration value. The photocurrent values linearly with the logarithm of HER2 concentrations range spanned from 0.01 ng/mL to 10 ng/mL with a detection limit of 3.5 pg/mL. Impressively, the clinical serum specimen results obtained by the proposed method and the wireless sensing device are in good agreement with the enzyme-linked immunosorbent assay (ELISA).

Point-of-Care Immunoassay Based on a Multipixel Dual-Channel Pressure Sensor Array with Visual Sensing Capability of Full-Color Switching and Reliable Electrical Signals.

The point-of-care (POC) method with affordability and portability for the sensitive detection of biological substances is an emerging topic in rapid disease screening and personalized medicine. In this work, we demonstrated a diverse responsive platform based on a dual-channel pressure sensor (DCPS). The DCPS had a multilayer flexible architecture consisting of a photonic hydrogel with chromatic transitions and a piezoresistive pressure sensor as the electrical data transmission unit, both of which had the property of pressure-induced mechanical stimulus feedback. By incorporating a platinum nanoparticles-labeled detection antibody (PtNPs-dAb) into the sandwich-type immunoreaction for the target carcinoembryonic antigen (CEA, as a model analyte), gas decomposition could be triggered by the addition of hydrogen peroxide (H2O2) to induce a significant increase under pressure in a closed chamber. Meanwhile, the DCPS enabled an accurate electrical signal output, and the photonic hydrogel converted spatiotemporal stimuli into eye-readable colorations with string brilliance. In this way, the target concentration could be quantificationally related to the electrical response and intuitively perceived through visible color alterations. Under optimal conditions, a sensitive determination of CEA was performed in a detectable range of 0.3-60 ng/mL with a limit of detection (LOD) of 0.13 ng/mL. In addition, the proposed protocol had satisfactory selectivity, accuracy, and reproducibility. Furthermore, an array-based immunoassay device was fabricated to conceptually validate its application potential in high-throughput biomedical detection and inspire a dual-signal POC diagnostic platform in a friendly way for resource-limited settings.

Dual-Signaling Photoelectrochemical Biosensor Based on Biocatalysis-Induced Vulcanization of Bi2MoO6 Nanosheets.

A magnetic-assisted photoelectrochemical (PEC) and colorimetric (CL) dual-modal biosensing platform with high precision was established to monitor prostate-specific antigen (PSA) based on Bi2MoO6 nanosheets (BMO) by coupling the aptamer-guided hybridization chain reaction (HCR) with the hydrolysate-induced vulcanization reaction of Bi2MoO6 nanosheets. Upon addition of PSA, trigger DNA (tDNA) was released by the interaction between the target analyte and the aptamer and then further hybridized with anchor DNA (aDNA) conjugated on magnetic beads (MBs). The as-released tDNA initiated the target-assisted HCR in the presence of two alternating hairpin sequences (Bio-H1 and Bio-H2) to produce nicked long double-stranded DNA on the surface of MBs, where numerous alkaline phosphatase (ALP) enzymes could assemble with MBs through the biotin-avidin reaction, resulting in the hydrolysis of sodium thiophosphate (TP) to H2S. The as-produced H2S reacted with BMO to form vulcanized BMO (BMO-S), thus leading to obvious enhanced PEC performance under visible light with the color change from light yellow to brown. Having optimized the test conditions, the magnetic-assisted biosensing system holds a good quantitative diagnosis sensitivity area in a range of 5.0 pg mL-1-100 ng mL-1 with a calculated detection limit down to 3.5 pg mL-1. Meanwhile, a visual colorimetric assay on basis of the change in the color of the materials was also realized. Given the exceptional performance of the constructed biosensor, it may possess great promise as an advanced bioanalytical tool for practical applications.

Photoelectrochemical bioanalysis of microRNA on yolk-in-shell Au@CdS based on the catalytic hairpin assembly-mediated CRISPR-Cas12a system.

This work reports on the proof-of-concept of a photoelectrochemical (PEC) biosensor with a horseradish peroxidase-single stranded DNA-encoded magnetic bead (MB-ssDNA-HRP) signal probe cleaved by the catalytic hairpin assembly (CHA)-mediated clustered regularly interspaced short palindromic repeats (CRISPR)-Cas12a system for the quantification of microRNA (miR-21) by using yolk-in-shell Au@CdS as a photoactive material.

Contactless Photoelectrochemical Biosensor Based on the Ultraviolet-Assisted Gas Sensing Interface of Three-Dimensional SnS2 Nanosheets: From Mechanism Reveal to Practical Application.

This work reports a contactless photoelectrochemical biosensor based on an ultraviolet-assisted gas sensor (UV-AGS) with a homemade three-dimensional (3D)-SnS2 nanosheet-functionalized interdigitated electrode. After rigorous examination, it was found that the gas responsiveness accelerated and the sensitivity increased using the UV irradiation strategy. The effects of the interlayer structure and the Schottky heterojunction on the gas-sensitive response of O2 and NH3 under UV irradiation were further investigated theoretically by 3D electrostatic field simulations and first-principles density functional theory to reveal the mechanism. Finally, a UV-AGS device was developed to quantify the blood ammonia bioassay in a small-volume whole blood sample by alkalizing blood to release gas-phase ammonia with a linear range of 25-5000 µM with a limit of detection (LOD) of 29.5 µM. The device also enables a rapid immunoassay of human cardiac troponin I (cTnI) with a linear range of 0.4-25.6 ng/mL and an LOD of 0.37 ng/mL using a urease-labeled antibody as the immune recognition molecule. Both analyses showed satisfying specificity and stability, suggesting that the device can be applied to practical assays and is of great potential to increase the value of gas-sensitive sensors in chemical biosensing.

Size-Controlled Engineering Photoelectrochemical Biosensor for Human Papillomavirus-16 Based on CRISPR-Cas12a-Induced Disassembly of Z-Scheme Heterojunctions.

Photoelectrochemical (PEC) biosensors incorporating biomolecular recognition with photon-to-electron conversion capabilities of the photoactive species have been developed for molecular diagnosis, but most involve difficulty in adjusting band gap positions and are unsuitable for PEC biodetection. In this work, an innovative PEC biosensor combined with quantum size-controlled engineering based on quantum confinement by controlling the quantum size was designed for the detection of human papillomavirus-16 (HPV-16) through CRISPR-Cas12a (Cpf1)-induced disassembly of Z-scheme heterojunction. To the best of our knowledge, quantum size-controlled engineering that precisely tunes the properties of photoactive materials is first utilized in the PEC bioanalysis. Based on the quantum size effect, the light absorption efficiency and charge-transfer rate were tuned to suitable levels to obtain the best PEC performance. After incubation with target HPV-16, the binding of Cas12a-crRNA to the target double-stranded DNA (dsDNA) stimulated the activity of indiscriminate cleavage toward single-stranded DNA (ssDNA), resulting in a decrease in photocurrent due to the blocking of electron transfer through the heterojunction. By optimizing experimental conditions, the Z-scheme sensing system exhibited incredible photocurrent response to HPV-16 in the range from 3.0 pM to 600 nM with a detection limit of 1.0 pM. Impressively, the application of the quantum size effect could stimulate more interest in the precise design of band gap structure to improve PEC performance.

CRISPR-Cas12a-Derived Photoelectrochemical Biosensor for Point-Of-Care Diagnosis of Nucleic Acid.

This work presented a point-of-care (POC) photoelectrochemical (PEC) biosensing for the detection of human papillomavirus-16 (HPV-16) on a portable electrochemical detection system by using CRISPR-Cas12a trans-cleaving the G-quadruplex for the biorecognition/amplification and a hollow In2O3-In2S3-modified screen-printed electrode (In2O3-In2S3/SPE) as the photoactive material. G-quadruplexes were capable of biocatalytic precipitation (H2O2-mediated 4-chloro-1-naphthol oxidation) on the In2O3-In2S3/SPE surface, resulting in a weakened photocurrent, but suffered from trans-cleavage when the CRISPR-Cas12a system specifically recognized the analyte. The photocurrent results could be directly observed with the card-sized electrochemical device via a smartphone, which displayed a high-value photocurrent for these positive samples, while a low-value photocurrent for the target-free samples. Such a system exhibited satisfying photocurrent responses toward HPV-16 within a wide working range from 5.0 to 5000 pM and allowed for detection of HPV-16 at a concentration as low as 1.2 pM. The proposed assay provided a smartphone signal readout to enable the rapid screening PEC determination of HPV-16 concentration without sophisticated instruments, thus meeting the requirements of remote areas and resource-limited settings. We envision that combining an efficient biometric PEC sensing platform with a wireless card-sized electrochemical device will enable high-throughput POC diagnostic analysis.

CRISPR/Cas12a-mediated liposome-amplified strategy for the photoelectrochemical detection of nucleic acid.

This study reports a photoelectrochemical biosensor for dopamine-loaded liposome-encoded magnetic beads cleaved by clustered regularly interspaced short palindromic repeats (CRISPR)/Cas 12a system for the quantification of human papilloma virus (HPV)-related DNA using neodymium-doped BiOBr nanosheets (Nd-BiOBr) as a photoactive matrix. Magnetic beads and dopamine-loaded liposomes are covalently attached to the both ends of ssDNA to construct dumbbell-shaped dopamine-loaded liposome-encoded magnetic bead (DLL-MB) probes. When the guide RNA binds to the target HPV-16, the ssDNA will be cleaved by Cas12a, thereby degrading the double dumbbell probes. After magnetic separation, the dissolved DLLs are treated with Triton X-100 to release the dopamine (as an electron donor), which was then detected by an amplified photocurrent using the Nd-BiOBr-based photoelectrode.

Versatile Synthesis of Hollow Metal Sulfides via Reverse Cation Exchange Reactions for Photocatalytic CO2 Reduction.

Herein, we explore a general Cu2-x S nanocube template-assisted and reverse cation exchange-mediated growth strategy for fabricating hollow multinary metal sulfide. Unlike the traditional cation exchange method controlled by the metal sulfide constant, the introduction of tri-n-butylphosphine (TBP) can reverse cation exchange to give a series of hollow metal sulfides. A variety of hollow multinary metal sulfide cubic nanostructures has been demonstrated while preserving anisotropic shapes to the as-synthesized templates, including binary compounds (CdS, ZnS, Ag2 S, PbS, SnS), ternary compound (CuInS2 , Znx Cd1-x S), and quaternary compound (single-atom platinum anchored Znx Cd1-x S; Znx Cd1-x S-Pt1 ). Experimental and density functional theory (DFT) calculations show that the hollow metal sulfide semiconductors obtained could significantly improve the separation and migration of photogenerated electron-hole pairs. Owing to the efficient charge transfer, the Znx Cd1-x S-Pt1 exhibited outstanding photocatalytic performance of CO2 to CO, with the highest CO generation rate of 75.31 µmol h-1 .

An ultrasensitive homogeneous electrochemical biosensor based on CRISPR-Cas12a.

Taking advantage of the high-efficiency indiscriminate ssDNA cleavage activity of Cas12a in combination with the diffusivity difference of methylene blue (MB)-labeled probes (short oligonucleotides/mononucleotides) toward the negatively-charged indium tin oxide (ITO) electrode, a simple, immobilization-free, highly sensitive, and homogeneous electrochemical biosensor for the detection of human papillomavirus (HPV-16) has been fabricated. At the core of the detection process, Cas12a employed ssDNA trans-cleavage capability to achieve short-strand nucleotide cleavage, while MB-labeled probes served as high-efficiency homogeneous electrochemical emitters to achieve differential pulse voltammetric (DPV) signal. Specifically, due to strong electrostatic repulsion, MB-labeled short oligonucleotides (reporter) cannot diffuse freely to the surface of the negatively charged ITO electrode, and only weak electrochemical signals can be detected. The presence of the target HPV-16 can activate the Cas12a complex to perform indiscriminate ssDNA cleavage of the reporter to produce MB-labeled mononucleotides. The MB-labeled mononucleotides with a smaller size have almost no negative charge, so they very easily diffuse to the surface of the ITO electrode and result in an enhanced electrochemical signal response. Different electrochemical responses (DPV peak intensity) of the CRISPR-Cas12a-assisted amplification strategy can be obtained through the diffusion rate of different MB-labeled DNA on the electrode, which is also positively correlated with the input HPV-16 concentration. Given the unique combination of the CRISPR-Cas12a system with the homogeneous electrochemical solution phase, the detection limit is determined to be 3.22 pM (wide dynamic working range from 0.01 nM to 100 nM) and the two-step detection workflow could be completed within 50 min at ambient temperature, which is superior to that of the HPV-based biosensors previously reported.